PRODUCTS

Optical Z-axis Preseter
Optical Z-axis Preseter
+
  • Optical Z-axis Preseter
  • Optical Z-axis Preseter

Optical Z-axis Preseter

  • Product description
  • Specifications
  • Features

    1.For setting length on machining centers/lathe centers
    2.Setting height : 50.00mm
    3.Large measuring surface and easy to operate
    4.Low sprang force,May avoid the milling cutter or the drill bit break
    5.Easy to be calibrated by a ground parallel or gauge block
    6.Better parallelism,sensitivity,and precision for use

     

    Z-axis tools setter adjustment methods

    1.Handwheel tune into μm forward Machining objects and slowly touch. (Fig:1) Slow feed to the red light,   

     (Fig:2)  returned to lights out, Lights Out point is the right place , Repeat the action before they can to really grasp  

     accuracy

    2.(Fig:3)probe to the side of the blade when the highest point of contact  detection surface

    3.This photoelectric Z axis settings for the high-precision products, NA calipers detection accuracy

    4.When the red light can be seen around with no blind spots.

    5.Under setter before now replace the battery

    6.Battery:. LR44/A76/G13x2 pieces

  •  

    Model No.

    HEIGHT

    weight/Kgs

    ACCURACY

    Remark

    P5078

    50.00mm

    0.7kgs

    ±0.005

    Machine needs conductive before use.

     

Send message
%{tishi_zhanwei}%