PRODUCTS

Motorized Vertical Test Stand
+
  • Motorized Vertical Test Stand

Motorized Vertical Test Stand

subcategory

  • Product description
  • Specifications
  • MX-500 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.

    Force control is activated when the applied force is at or between the high and low set point(s) of our force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

    Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of our force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.

    Speed control, quick return and emergency stop are standard features.

    Features:

    1 The stand can be used for both compression (push) and tension (pull) test

    2.The combination of a screw drive system and a high performance brushless motor provides extremely smooth and powerful operation over its speed range.

    3.Jogging, single loop, continuous loop for up to 72 hours, power control operation and our push-pull force gauge.

    4. Wide speed range: 0.4-94 inches / min (optional speed range)

    5. Can be drawn length 16"

    6. Optional timer and digital range finder

    7. Conditional overload prevention

  • Specifications

    Capacity

    500 lbs

    Stroke

    13"

    Travel Rate

    0.2 - 7 in/min

    Warranty

    2 years

Send message
%{tishi_zhanwei}%