Digital Cupping Tester
  • Digital Cupping Tester

Digital Cupping Tester

  • Product description
  • Specifications
  • Digital Cupping Tester

    Cupping Tester is applicable to evaluate crack resistance and detachment from the metal substrate of coated surface which is coated with paint, varnish, etc., after the coating layer is deformed gradually under standard condition. The sample panel(max. 1.25mm thick×70 mm width, coated min.0.03mm)is clamped by an upper wheel and manually cupped by a ф20mm  hemispherical indenter onto a ф27mm die by a drive wheel. The depth to cause failure is indicated on a precise digital display. The results can be easily observed with an illuminated magnifier.



    ◆  Compliance with ISO 1520、BS 3900 Part 4、DIN 1502 etc
    ◆  Automatic coordinate positioning system: machine can memorize the home position after being zeroed, and locate

          the plugs position automatically. Therefore, the traditional error caused by replacement or wobble can be eliminated.

    ◆  Highly precise position sensor: the minimum division value of the depression depth can reach 0.01mm.

    ◆  Applicable for every kind of substrate, and the maximum pressure can reach 2500N.  

    ◆  The coordinate position of the plug can be zeroed manually and can be memorized while it is cold.

    ◆  Hand twist operation: laborsaving and easy-handling.

    Key words:
    • Digital Cupping Tester
  • Technical Parameters:
    ■  Diameter of punch: ф20mm
    ■  Maximum dent thickness: 12mm
    ■  Maximum depress power: 2,500N
    ■  Precision of dent: 0.01mm
    ■  Counter: digital display, in 0.01mm increments
    ■  Dimension of test pane:150mm×70mm ×0.03-1.25mm Smooth, not deformed
    ■  Material:polished steel panel
    ■  Weight: 20Kg
    ■  Dimensions: 230×300×280mm (L×W×H)


Next Page

Send message