PRODUCTS

Grindometer
+
  • Grindometer

Grindometer

subcategory

  • Product description
  • Specifications
  • Grindometer

    Grindometer is used to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion. It does not determine particle size or particle size distribution.

    Grindometer is used in controlling the production, storage and application of dispersion products produced by milling in the paint, plastic pigment, printing ink, paper, ceramic, pharmaceutical, food and many other industries.

    Grindometer is a flat steel block in the surface of which are two flat-bottomed grooves varying uniformly in depth from a maximum at one end of the block to zero near the other end. Groove depth is graduated on the block according to one or more scales used for measuring particle size.

    Most gages will have one scale marked in either mils or microns.

    1 mil = 25.4 microns

    1 mil = 0.001 inch

    1 micron, µm - 0.001 mm

     

    The Hegman scale ranges from 0 to 8 with numbers increasing as the particle size decreases.

    0 Hegman = 4 mil/100 micron particle size

    4 Hegman = 2 mil/50 micron particle size

    8 Hegman = 0 mil/0 micron particle size

     

    We offer a wide variety of grind gages varying in scales, number of grooves, length and width of grooves and size of the block.

     

    Complies with ISO 1524,DIN EN ISO NF 21524,ASTM D1210,ASTM D1316,ASTM D333,DIN 53203,NFT 30046

     

    Procedure

    Place a slight excess of sample in the deep end of the groove and, with the straight-edge scraper provided, draw the sample toward the shallow end of the groove. Ratings are in terms of the point on the scale where the oversize particles, or furrows made by them, first appear in substantial concentration.

     

    Care of Grindometer

    Clean the gage after each use. Use a solvent and a soft cloth. Keep the gage covered or encased at all times when not in use. Protect gages that lie idle for extended periods of time from rust with an oil coating or oil soaked wrap.

  •  Technical Data:

    Model.No

    Dims(mm)

    Path Width(mm)

    No.of Paths

    Range

    (um)

    Range

    (Hegman)

    Range

    (MILS)

    KT 210-0S

    120×25×13

    12

    1

    0-15

    --

    --

    KT 210-1S

    120×25×13

    12

    1

    0-25

    --

    --

    KT 211-0

    165×37×12

    12

    2

    0-15

    --

    --

    KT 210-0

    170×50×15

    12

    1

    0-15

    --

    --

    KT 210-1

    170×50×15

    12

    1

    0-25

    8-6

    --

    KT 210-2

    170×50×15

    12

    1

    0-50

    8-4

    --

    KT 210-3

    170×50×15

    12

    1

    0-100

    8-0

    --

    KT 210-4

    170×50×15

    12

    1

    0-150

    --

    --

    KT 211-1

    175×65×15

    12

    2

    0-25

    8-6

    0-1

    KT 211-2

    175×65×15

    12

    2

    0-50

    8-4

    0-2

    KT 211-3

    175×65×15

    12

    2

    0-100

    8-0

    0-4

    KT 212-0

    175×65×15

    37

    1

    0-15

    --

    --

    KT 212-1

    175×65×15

    37

    1

    0-25

    8-6

    0-1

    KT 212-2

    175×65×15

    37

    1

    0-50

    8-4

    0-2

    KT 212-3

    175×65×15

    37

    1

    0-100

    8-0

    0-4

    KT 213-1

    240×85×25

    25

    2

    0-25

    --

    --

    KT 213-2

    240×85×25

    25

    2

    0-50

    --

    --

    KT 213-3

    240×85×25

    25

    2

    0-100

    --

    --

     Standard accessory

     Grind Block

     Scraper

     Application Manual

     Reusable Storage Case

Pre Page

No

No

Next Page

Send message
%{tishi_zhanwei}%