PRODUCTS

Wet Abrasion Scrub Tester
+
  • Wet Abrasion Scrub Tester

Wet Abrasion Scrub Tester

subcategory

  • Product description
  • Specifications
  • Wet Abrasion Scrub Tester

    This machine is widely used to test the resistance of many materials to scrub, abrasion, washing. Paints, varnishes, other coatings and finishing can be applied on various supporting media e.g. plastic, glass, wood, paper, leather etc., and submitted to the accelerated test, by reciprocating brushes, sponges or abrasives on the samples with(or without) reagent depending on methods. When applicable, the machine is fitted with a dosing peristaltic pump .

    This machine can be in accordance with ASTM D 2486 or ISO 11998/BS 3900 only through changing the different scrub device. We design two scrub device for these different standard.

    Wearing, loss of gloss, damages or soil removal capability of detergents can be observed with high repeatability and reproducibility.

  • Main Technical Parameters:

    ■ Weight of brush(including brushing tools): 450±2g/135±1g

    ■ Specification of brush: 38mm×90mm

    ■ Distance of brush travel back and forth: 300mm

    ■ Travel frequency: 37±1time/min

    ■ Counter:4 digit-number

    ■ Input electrical power: 220V/50Hz

    ■ Weight: 32Kg 

    ■ Dimension: 570× 420×300mm(L×W×H)

    ■ Model No:

    KT-110---Wet Abrasion Scrub Tester

    KT-110-3---Nylon brush of ASTM D 2486

    KT-110-1--- ISO 11998 Special brush

    KT-110-2---Black plastic panel (pack of 100)

Pre Page

No

No

Next Page

Send message
%{tishi_zhanwei}%