PRODUCTS

Digital Charpy Izod Impact Tester
+
  • Digital Charpy Izod Impact Tester

Digital Charpy Izod Impact Tester

subcategory

  • Product description
  • Specifications
  • Digital Charpy Izod Impact Tester

    This kind of digital impact testing machine is mainly used to measure the impact toughness

    of rigid plastic, reinforced nylon, fiberglass, ceramics, cast stone, insulation materials and

    other non-metallic materials. It is the ideal testing equipment in the chemical industry, scientific

    research institutes, universities and quality testing departments.

    Features:

    1. The digital charpy izod impact tester is a kind of intelligent digital testing machine using the

    microcomputer technology. It is advanced that it can automatically correct the energy loss caused

    by friction and windage to modify the energy chart, getting rid of the resistance effect. (The detection

    of the pendulum energy after specimen fracture and the correction of energy loss are finished during the impact at once)

    2. The test results of digital charpy izod impact testing machine are electrically displayed to make the reading

    more intuitive, improving the precision and accuracy of the impact machine.

    3. The otary encoder Park grating angle measurement technology is used by the instrument to display the

    thrusting energy, impact strength, pre-Yang angle, up angle, the average angle and the energy loss corrected

    automatically, with the advantages of high accuracy, good stability and a large measure range.

     4. The main technical parameters of the digital charpy izod impact testing machine are strictly in conformity

    with the standards of ISO 179,ASTM D256,ISO 8256.

    Key words:
    • Digital Charpy Izod Impact Tester
  • Main technical parameters:

    A. charpy impact testing part:

    1. impact velocity:       2.9m/s;3.8m/s

    2. pendulum energy:    2J,4J,5J

    3. distance from the pendulum center to the specimen center:   221mm

    4. the pendulum tilt angle:    150°

    5. jaws bearing distance:      60mm,70mm,95mm

    6. supporting blade radius: R=1mm

    7. impact blade angle:30°

    8. impact blade radius: R=2mm

    9. Main impact attachment: 2J,4J and 5.5J impact weight

        The pendulum arm used in the instrument is a kind of new material stronger than steel and lighter than aluminum (patent pending).

    B. izod impact testing part:

    1. impact velocity:    3.5m/s

    2. pendulum energy:    1J, 2.75J, 5.5J

    3. the pendulum tilt angle:    150°

    4. distance from the pendulum center to the impact blade:    335mm

    5. distance from the impact blade to the horizontal jaw:    22mm

    6. blade radius:  R=0.8mm

    7. The type of the testing specimen should match the requirements of the standard ISO180—82 strictly.

        The pendulum arm used in the instrument is a kind of new material stronger than steel and lighter than aluminum (patent pending). 

Send message
%{tishi_zhanwei}%