PRODUCTS

  • Product description
  • Specifications
  • Indentors

    We offer a wide range of indentors,also offer special adapters for indentors to enlarge the field of application. Small gooseneck adaptors are available in three sizes to permit regular or superficial Rockwell hardness testers to perform internal tests on rings, tubes and annular parts where the inside diameter, plus the wall thickness, is less than 50.8mm or 2 inches.
    These adaptors will fit any of the standard Rockwell hardness testers. The gooseneck adaptor can be clamped into the bottom of the plunger rod (in the same manner as an indentor) and is not heavy enough to affect a reading due to increasing the applied load. The minimum internal diameter which can be tested is 11.5mm or 7/16 inch.

  •  List of indentors:

    Rockwell Indenter

    Model No.

    Design

    Rockwell type 120°  

    diamond cone

    PRI-001

    Steel Rockwell ball

    indentor - 1/16”

    PRI-002

    Steel Rockwell

    ball indentor - 1/8”

    PRI-003

     

    Steel Rockwell

    ball indentor - 1/4”

    PRI-004

     

    Steel Rockwell

    ball indentor - 1/2”

    PRI-005

     

    Steel Rockwell

    ball indentor -1.588mm

    PRI-006

     

    Steel Rockwell ball

    indentor -3.175mm

    PRI-007

     

    Steel Rockwell ball

    indentor -6.35mm

    PRI-008

     

    Steel Rockwell ball

    indentor -12.7mm

    PRI-009

     

    Carbide Rockwell ball

    indentor - 1/16”

    PRI-010

     

    Carbide Rockwell ball

    indentor - 1/8”

    PRI-011

     

    Carbide Rockwell ball

    indentor - 1/4”

    PRI-012

     

    Carbide Rockwell ball

    indentor - 1/2”

    PRI-013

     

    Carbide Rockwell ball

    indentor-1.588mm

    PRI-014

     

    Brinell Indenter

    Model No.

    Design

    Carbide ball indentor - Φ2.5mm

    PBI-002

    Carbide ball indentor - Φ5mm

    PBI-003

     

    Carbide ball indentor - Φ10mm

    PBI-004

     

    Carbide ball- Φ2.5mm

    PBI-006

     

    Carbide ball- Φ5mm

    PBI-007

     

    Carbide ball- Φ10mm

    PBI-008

     

    Vickers diamond  indentor 136°

    PMI-001

     

    Knoop diamond indentor 172º

    PMI-002

     

    Micro Vickers 136° indentor

    extra length- 29mm

    PMI-003

     

    Micro diamond indenter

    PMI-004

     

     

Send message
%{tishi_zhanwei}%