Wechat: 8613620227427
Msn: joerogertools@hotmail.com
Skype: joeroger
Email : sales@prideinstrument.com
COPYRIGHT SHENZHEN PRIDE INSTRUMENT INC. ALL RIGHTS RESERVED 粤ICP备14010292号
Technical Support:300.cn
PRODUCTS
Ultrasonic Hardness Tester
Ultrasonic Hardness Tester
Introduction:
●ULTRA UH-7 manual ultrasonic hardness tester applies module design, which can work with manual probes SP-10N,SP-20N,SP-50N,SP-98N, can be used to test hardness of small forgings, cast material, weld inspection, heat affected zone, Ion-nitrided stamping dies and molds, forms, presses, thin walled parts, bearings, tooth flanks, etc.
●ULTRA UH-7 can test hardness of ferrous metal, non ferrous metal and alloys, it is an ideal instrument, can test hardness of HRA, HRB, HRC, HV, HBW, HS on site, assembly line and lab.
●ULTRA UH-7 can also be upgraded with motorized probes KP-3N.KP-5N,KP-8N,KP-10N, then the function is same with UH-8. Completely accords with ASTM A1038-2005, DIN50159-1-2008
Characteristics:
●Perfect Accuracy——±3% HV, ±1.5HR, ±3%HB
●Microscopic Indentation—— Only high-power microscope can observe the indentation.
●Quick Measurement——Result in 2 seconds.
●Large LCD Display——Directly display measurement result, times count, maximum, minimal, average and deviation.
●Promised Warranty——2-Year warranty for main unit (Excludes Probe).
●Mass Storage——Save 1000 groups measurement data.
●Simple Calibration——Save 20 groups calibration data for invoking, improve calibration efficiency.