• Granite

    Granite

  • OUR COMPANY

    OUR COMPANY

  • OUR COMPANY

    OUR COMPANY

  • OUR COMPANY

    OUR COMPANY

  • OUR COMPANY

    OUR COMPANY

  • OUR COMPANY

    OUR COMPANY

  • OUR COMPANY

    OUR COMPANY

Wechat: 8613620227427

Msn: joerogertools@hotmail.com

Skype: joeroger

Email : sales@prideinstrument.com

    info@prideinstrument.com

COPYRIGHT SHENZHEN PRIDE INSTRUMENT INC. ALL RIGHTS RESERVED   粤ICP备14010292号

Technical Support:300.cn

PRODUCTS

Micro Hardness Tester

Serial number
MV-1000L
没有此类产品
immediate inquiry
Product description
Specifications

Micro Hardness Tester

 Introduction

Model MV-1000L precision automatic turret digital micro hardness tester is a novel type micro Vicker’s and Knoop’s hardness testing apparatus which adopts precise mechanical technique and photoelectrical technique.

The configuration of this tester which adopts micro-computer to control is novel, by means of

adjusting the soft key, the tester is able to adjust and measure either strong or weak light source, and is capable of presetting holding time of the test load and is displayed by LED. This tester adopts peculiar indentation measuring, inverting and read mechanism through one measurement of micrometer eyepiece. It is easy to use and high precision in measurement.

The hardness tester is also equipped with photographic device which can take a photo for all measured indentation and the metallographic formation of materials. It is suitable to measure the micro hardness of small, thin specimen, and superficial permeable coating (or plating) layer etc. such specimen, as well as to measure the micro hardness of glass, ceramics, agate, and gem etc such brittle materials, hence it is an ideal hardness measuring and testing apparatus for the scientific research institute, factory, and quality supervising department to carry out materials research and inspection.

Corresponding parameter set not found, please add it in property template of background

Technical Specifications

Test Pressure                      0.098, 0.246, 0.49, 0.98,

1.96, 2.94, 4.90, 9.80N

Pressure Loading & Unloading       Automatic

Magnification of Microscope         400X (for measuring)

100 X (for measuring)

Pressure Holding Time              5~60s (5 second as input increment)

Minimum Measurable Unit           0.5μm

Maximum Height of Sample         180mm

Maximum Width of Sample          110mm

Main Body Weight approx.           60kg

Power Supply                       AC220V/50Hz

Machine Size (L*W*H)              (490*320*530)mm

Measurement Range                5-2500HV

 

Standard accessory

Main machine (Including a micro Vicker’s indenter 10X,40X objectives and thermal printer ).

Loading shaft                            1

Weights                                 6

Cross test table                          1

Holder for holing thin sheet                1

Flat edge holder                          1

Fine wire holder                          1

Screwdriver                              2

Horizontal adjusting screw                 4

Power wire                                1

10x micrometer eyepiece                    1

Level                                     1

Spare lamp                            2(6V/12W)

Spare fuse                             2(1A)

Micro Vicker’s hardness block             1 set(1 high, 1 medium)

Qualified product certificate               1

Operation instructions for the product       1

 

暂未实现,敬请期待
暂未实现,敬请期待