PRODUCTS CENTER
Canada Inside Micrometer With Interchangeable Anvil
Category:
Product Description
Inside Micrometer With Interchangeable Anvil
●Graduation: metric 0.01mm / inch 0.0001"
●60°or 55°V-shaped and cone-shaped anvils(interchangeable)are optional
●Steel ball tipped anvils(interchangeable)also optional for measuring over pin diameter of internal gears.
●Anvil tail dimeionsion:Ø5x15mm
●With a standard caliper gauge for zero setting
●Packed in wooden box
V shaped and knife edged anvils optional sizes
|
Metric screw(60° thread) |
|
|
Model No. |
Pitch |
|
P8107-1M |
0.4-0.5mm/ 64-48TPI |
|
P8107-2M |
0.6-0.9mm/ 44-28TPI |
|
P8107-3M |
1-1.75mm/ 24-14TPI |
|
P8107-4M |
2-3mm/ 13-9TPI |
|
P8107-5M |
3.5-5mm/ 8-5TPI |
|
P8107-6M |
5.5-7mm/ 4.5-3.5TPI |
|
P8107-7M |
Set:0.4-0.5mm/ 64-48TPI, 0.6-0.9mm/ 44-28TPI, 1-1.75mm/ 24-14TPI, 2-3mm/ 13-9TPI, 3.5-5mm/ 8-5TPI, 3.5-5mm/ 8-5TPI, 5.5-7mm/ 4.5-3.5TPI |
|
Whitworth screw(55° thread) |
|
|
Model No. |
Pitch |
|
P8107-1T |
60-48TPI |
|
P8107-2T |
48-40TPI |
|
P8107-3T |
40-32TPI |
|
P8107-4T |
32-24TPI |
|
P8107-5T |
24-18TPI |
|
P8107-6T |
18-14TPI |
|
P8107-7T |
14-10TPI |
|
P8107-8T |
10-7TPI |
|
P8107-9T |
7-4.5TPI |
|
P8107-10T |
4.5-3.5TPI |
|
P8107-11T |
Set: 60-48TPI, 48-40TPI, 40-32TPI, 32-24TPI, 24-18TPI, 18-14TPI, 14-10TPI, 10-7TPI, 7-4.5TPI, 4.5-3.5TPI |
APP Web