Ireland Coating Thickness Gauge

Category:

IrelandPAINT TESTING EQUIPMENTS

Phone:400-888-8888

Inquire

Product Description

Coating Thickness Gauge

Features:

●Two thickness measuring methods adopted, the gauge can be applied to thickness measuring of non-magnetic coating on magnetic metal substrate as well as non-conductive coating on non-magnetic metal substrate;

●5 types of probes can be used (F400, F1, F10, N1, CN02,)；

●2 measuring modes are available: continuing measuring mode（CONTINUE）and single measuring mode（SINGLE）；

●2 operation modes are available: direct mode (DIRECT) and batch mode (A-B)；

●5 statistic values：mean value（MEAN）, max. value（MAX）, min. value（MIN）, numbers of measuring（NO．）, standard deviation（S．DEV）；

●2 methods can be used to calibrate the gauge, and the system error of the probe can be corrected by use of basic calibrating method:

●Storage function: 495 measuring values can be stored;

●Deletion function: delete the single questionable data occurring in measuring, as well as all of the data in memory area to perform the new measuring;

●Limit can be set: capable of alarming automatically for measuring values out of limit; and a batch of measuring values can be analyzed via histogram;

●Printing function: measuring value, statistic value, limit and histogram can be printed;

●Capable of communication with PC: measuring values and statistic values can be sent to PC to perform the further process for data;

●Indication of low voltage;

●Buzzing indication in the course of operation;

●With the function of error warning, error warning can be carried out through display or buzzing;

●Two shut down modes are available: manual shut down mode and automatic shut down mode;

INTERNATIONAL STANDARDS:

ASTM B 499, ASTM D 1400, BS 3900-C5-6B, DIN 50981,DIN 50984, ISO 1461,ISO 2360

Technical parameters

Probe model		F400		F1		F1/90°	F5	F10
Operating principle		Magnetic induction
Measuring range (mm)		0～400		0～1250			0～5000	0～10000
Low range resolution(mm)		0.1		0.1			1	10
Accuracy	One-point calibration (mm)	±(3%H+1)					±(3%H+5)	±(3%H+10)
	Two-point calibration (mm)	±((1～3)%H+0.7)		±((1～3)%H+1)			±((1～3)%H+5)	±((1～3)%H+10)
Measuring conditions	Min curvature radius (mm)	Convex	1	1.5	Flatten		5	10
	Diameter of the min area (mm)	F3		F7	F7		F20	F40

Probe model		N400			N1	N1/90°	CN02		N10
Operating principle		Eddy current
Measuring range (mm)		0～400 (Chrome on copper		0～1250 0～40)				10～200	0～10000
Low range resolution(mm)		0.1		0.1				1	10
Accuracy	One-point calibration (mm)	±(3%H+0.7)		±(3%H+1.5)				±(3%H+1)	±(3%H+25)
	Two-point calibration (mm)	±[(1～3)%H+0.7]		±[(1～3)%H+1.5]				___	±[(1～3)%H+25]
Measuring conditions	Min curvature radius (mm)	Convex	1.5	3		Flatten		Only flatten	25
	Diameter of the min area (mm)	F4		F5		F5		F7	F50
	Critical thickness of substrate (mm)	0.3		0.3		0.3		No limit	50mm aluminum foil