PRODUCTS
- Product description
- Specifications
-
Cross Hatch Tester
This method is used for deter_x001f_min_x001f_ing the par_x001f_al_x001f_lel groove paint adh_x001f_e_x001f_sion of one or many lay_x001f_ers on a sub_x001f_s_x001f_trate, gen_x001f_er_x001f_ally a metal panel. Cross Hatch Testers are avai_x001f_l_x001f_able in 2 dif_x001f_fer_x001f_ent cross_x001f_cut blade ver_x001f_sions, one is a multi-cut blade with 6 cutt_x001f_ing edges, the other ver_x001f_sion has one cutt_x001f_ing edge. The Cross Cut blades are made of har_x001f_d_x001f_ened steel alloy and are designed for retain_x001f_ing a sharp cutt_x001f_ing edge to reduce the fre_x001f_quency of blade replace_x001f_ment.
ASTM D3359 requires 11 cut lines:
1 mm cut_x001f_ter for films up to 50 µm (2 mils) thick
2 mm cut_x001f_ter for films between 125 µm (2 - 5 mils) thickISO 2409 pre_x001f_scribes that the num_x001f_ber of cuts shall be 6, and that the cut in each direc_x001f_tion must be accord_x001f_ing to the film thick_x001f_ness and type of coat_x001f_ing used as shown below:
0 - 60 µm 1 mm space for hard sub_x001f_s_x001f_trates (metal)
0 - 60 µm 2 mm space for soft sub_x001f_s_x001f_trates (plas_x001f_tic)
61 - 120 µm 2 mm space for hard or soft sub_x001f_s_x001f_trates
121 - 250 µm 3 mm space for hard or soft sub_x001f_s_x001f_tratesComplies with ASTM D3359,ISO2409-1992,DIN 2409, ECCA T-6,BS 3900E6
-
Technical Specifications:
Model No.
Description
No. of Teeth
No. of Cutting Edges
Cutter Spacing
KT-100A
Cross-Cut Kit 6, 6-edges 1 mm
6
6
1 mm (0.04 in)
KT-100B
Cross-Cut Kit 6, 6-edges 2 mm
6
6
2 mm (0.08 in)
KT-100C
Cross-Cut Kit 6, 1-edge 1 mm
6
1
1 mm (0.04 in)
KT-100D
Cross-Cut Kit 6, 1-edge 2 mm
6
1
2 mm (0.08 in)
KT-100E
Cross-Cut Kit 6, 1-edge 3 mm
6
1
3 mm (0.12 in)
KT-100F
Cross-Cut Kit 11, 1-edge 1 mm
11
1
1 mm (0.04 in)
KT-100G
Cross-Cut Kit 11, 1-edge 1.5 mm
11
1
1.5 mm (0.06 in)
KT-100H
Cross-Cut Kit 11, 6-edges 1.5 mm
11
6
1.5 mm (0.06 in)
KT-100F
Cross-Cut Kit 6, 1-edge 2 mm
6
1
2 mm (0.08 in)
The Full Kit comes complete with:
Cross cut tester kit,hex wrench,magnifier 10x,brush,plastic carry case,adhesive tape 3M,instruction manual and plastic carry case。
Pre Page
Next Page
APP Web