PRODUCTS
- Product description
-
X-Ray Film Cassettes (Single)
X-RAY FILM CASSETTES (SINGLE)
All types of Single-Envelope Plastic Cassettes are of the same basic design.
They consist of a single envelope, open at one end, through which film and screens are loaded and unloaded. The open ends of the envelopes fold over, producing an effective light seal. They are then held closed by means of nylon fastener. There is an extra finger-tab at the bottom to assist in holding the cassette to the bench for easier and quicker unloading. Closure is normally made on the shorter side of a rectangular cassette, but special ones, with the opening on the long side, can be made to special order.
Metric Sizes (cm)
5 x 20
6 x 48
10 x 20
13 x 18
20 x 30
5 x 40
7 x 40
10 x 24
15 x 40
24 x 30
6 x 24
7 x 48
10 x 40
18 x 24
30 x 40
6 x 40
9 x 12
10 x 48
18 x 43
35 x 43
Imperial Sizes (in)
3.5 x 8.5
4 x 10
4.5 x 10
7 x 17
12 x 15
3.5 x 10
4 x 15
4.5 x 11
8 x 10
14 x 17
3.5 x 17
4.5 x 8.5
4.5 x 17
10 x 12
X-RAY LEAD INTENSIFYING SCREENS
Lead Intensifying Screens are thin sheets of lead foil mounted on card for ease of handling. One is placed on each side of an x-ray film and in close contact with it, inside a cassette or film-holder before exposure. They are used in most radiographic techniques, excluding some of those employing low kilovoltages, because they reduce the exposure required and improve the quality of the image. The screens are made from the finest available radiographic lead foil, laminated onto flexible white photographic base card.
We produce thickness size:0.03mm and 0.1mm.
10pcs as 1 set,unit is set
Metric Sizes (cm)
5 x 20
6 x 48
10 x 20
13 x 18
20 x 30
5 x 40
7 x 40
10 x 24
15 x 40
24 x 30
6 x 24
7 x 48
10 x 40
18 x 24
30 x 40
6 x 40
9 x 12
10 x 48
18 x 43
35 x 43
Imperial Sizes (in)
3.5 x 8.5
4 x 10
4.5 x 10
7 x 17
12 x 15
3.5 x 10
4 x 15
4.5 x 11
8 x 10
14 x 17
3.5 x 17
4.5 x 8.5
4.5 x 17
10 x 12
X-RAY STAINLESS STEEL CHANNEL HANGER
Perforated Hangers – available as full range below* – perforated channels allow
excess fluid to drain away more easily.
Channel Hangers are manufactured from stainless steel and depending on thesize of films to be processed the channel hanger will accommodate one to four films
at a time.
The film(s) are slid into the two channelled sides and bottom , the top flap is
positioned and the film is then held secure and ready for use.
The top bar of the channel hanger sits on the top edge of the processing
tank with the films suspended in the processing chemicals.
Material: Stainless Steel 304
Material Thickness: 0.6 mm
Solder Point : Spot Welding
Size: Customer made different Sizequot
Model No.
Size cm
Film number
RHG624
6 x 24
(4 Films)
RHG648
6 x 48
(4 Films)
RHG740
7 x 40
(4 Films)
RHG748
7 x 48
(4 Films)
RHG912
9 x 12
(3 Films)
RHG1024
10 x 24
(3 Films)
RHG1040
10 x 40
(3 Films)
RHG1048
10 x 48
(3 Films)
RHG1318
13 x 18
(2 Films)
RHG1540
15 x 40
(2 Films)
RHG1824
18 x 24
(1 Film)
RHG1843
18 x 43
(1 Film)
RHG2430
24 x 30
(1 Film)
RHG3040
30 x 40
(1 Film)
RHG3543
35 x 43
(1 Film)
Model No.
Product Description
RHG-100
Channel Hanger 3-1/2"x10",3 in 1
RHG-110
Channel Hanger 3-1/2"x12",3 in 1
RHG-120
Channel Hanger 3-1/2"x17",3 in 1
RHG-130
Channel Hanger 4 "x10 ",3 in 1
RHG-140
Channel Hanger 4"x12",3 in 1
RHG-150
Channel Hanger 4 "x15",3 in 1
RHG-160
Channel Hanger 4"x17",3 in 1
RHG-170
Channel Hanger 4-1/2 "x10",2 in 1
RHG-180
Channel Hanger 4-1/2"x12",2 in 1
RHG-190
Channel Hanger 4-1/2 "x15",2 in 1
RHG-200
Channel Hanger 4-1/2 "x17",2 in 1
APP Web